Ondine Wavy Backlit LED Full-Length Mirror | 200 x 100cm
SKU: FLM-ONIL-200x100

Customers Also Bought
SKU: FLM-ONIL-200x100

Customers Also Bought
Curves That Ripple Like Water
Ondine takes its name from the water spirit of European folklore, and the outline moves like a wave: a high rounded crest at the top, soft swells and hollows down both sides and a rounded base. An LED strip hidden behind the edge traces every curve with a soft halo on the wall. A touch on the sensor on the glass switches the light on and steps through cool white, warm white and neutral white. Touch and hold to dim, and the mirror remembers your last setting.
A Statement At Full Height
At 200 x 100cm the Ondine is a full length mirror with glass to spare, and with no frame the waves run right to the edge. It brings movement to a plain wall in a living room, bedroom or entry, and switched on in the evening it reads as a sculptural light as much as a mirror.
Hang It Or Lean It
Two hanging rails on the rear sit on four wall hooks that come in the box. Wall mounting must be carried out by a professional installer, with two people to lift the mirror onto the hooks. You can also lean it against a wall, as long as it is secured so it cannot tip, and the glow still washes the wall behind. Plan a power point within reach, as the mirror plugs into a standard wall socket. The Ondine is for indoor use only, away from splashes and steam, and is not rated for use in a bathroom.
The Specs
Overall size 200 x 100cm at its tallest and widest, and 30mm deep including the backlight. Frameless 5mm mirror glass with an LED strip around the rear edge, three colour settings and dimming from the touch sensor. Two hanging rails on the rear with four wall hooks supplied. Standard New Zealand plug on a power cable that runs about 80cm beyond the mirror edge. It weighs 22.1kg, so lifting it takes two people.
| Height | 200cm |
| Width | 100cm |
| Depth | 30mm |
| Weight | 22.1kg |
| Packaging | 207 x 106.5 x 7cm, 27.2kg |
| Shipping Volume | 0.1543 m³ |
| Shipping Weight | 27.2 kg |
| Frame Material | Frameless |
| Glass | 5mm Mirror Glass |
| Material | 5mm Mirror Glass, LED backlight strip, Backing board with hanging rails |
| Mounting | Hangs on the wall or leans on the floor |
| Care | Clean with a soft, lint free cloth and gentle glass cleaner. Avoid abrasive materials to prevent scratching. Switch off and unplug before cleaning. |
| Notes | Backlit LED halo with three colour settings (cool white, warm white and neutral) and dimming from the touch sensor on the glass. It plugs into a standard wall socket with a New Zealand plug, and the power cable runs about 80cm beyond the mirror edge. Indoor use only, away from splashes and steam. Not rated for bathrooms. Two hanging rails on the rear sit on four supplied wall hooks. Wall mounting must be carried out by a professional installer, with two people to lift the mirror onto the hooks. It can also lean against a wall, secured so it cannot tip. |
| Downloads | Installation and user guide (PDF)Back panel and wall hook positions (PDF)How to hang it: installation video (MP4) |
Styling
Room Setup
Interior
DimensionsCurves That Ripple Like Water
Ondine takes its name from the water spirit of European folklore, and the outline moves like a wave: a high rounded crest at the top, soft swells and hollows down both sides and a rounded base. An LED strip hidden behind the edge traces every curve with a soft halo on the wall. A touch on the sensor on the glass switches the light on and steps through cool white, warm white and neutral white. Touch and hold to dim, and the mirror remembers your last setting.
A Statement At Full Height
At 200 x 100cm the Ondine is a full length mirror with glass to spare, and with no frame the waves run right to the edge. It brings movement to a plain wall in a living room, bedroom or entry, and switched on in the evening it reads as a sculptural light as much as a mirror.
Hang It Or Lean It
Two hanging rails on the rear sit on four wall hooks that come in the box. Wall mounting must be carried out by a professional installer, with two people to lift the mirror onto the hooks. You can also lean it against a wall, as long as it is secured so it cannot tip, and the glow still washes the wall behind. Plan a power point within reach, as the mirror plugs into a standard wall socket. The Ondine is for indoor use only, away from splashes and steam, and is not rated for use in a bathroom.
The Specs
Overall size 200 x 100cm at its tallest and widest, and 30mm deep including the backlight. Frameless 5mm mirror glass with an LED strip around the rear edge, three colour settings and dimming from the touch sensor. Two hanging rails on the rear with four wall hooks supplied. Standard New Zealand plug on a power cable that runs about 80cm beyond the mirror edge. It weighs 22.1kg, so lifting it takes two people.
| Height | 200cm |
| Width | 100cm |
| Depth | 30mm |
| Weight | 22.1kg |
| Packaging | 207 x 106.5 x 7cm, 27.2kg |
| Shipping Volume | 0.1543 m³ |
| Shipping Weight | 27.2 kg |
| Frame Material | Frameless |
| Glass | 5mm Mirror Glass |
| Material | 5mm Mirror Glass, LED backlight strip, Backing board with hanging rails |
| Mounting | Hangs on the wall or leans on the floor |
| Care | Clean with a soft, lint free cloth and gentle glass cleaner. Avoid abrasive materials to prevent scratching. Switch off and unplug before cleaning. |
| Downloads | Installation and user guide (PDF)Back panel and wall hook positions (PDF)How to hang it: installation video (MP4) |
Styling
Room Setup
Interior
DimensionsBundle 3+ items and save up to 10%. Curated to complement the Ondine Wavy Backlit LED Full-Length Mirror | 200 x 100cm.
Ondine Wavy Backl...
Enter your postcode below
Enter your postcode below