Clair Arched Backlit LED Full-Length Mirror | 180 x 80cm
SKU: FLM-CLAL-180x80

Customers Also Bought
SKU: FLM-CLAL-180x80

Customers Also Bought
A Halo Of Light Around The Glass
The Clair is a frameless arched mirror with a ring of LED light hidden behind its edge. Switch it on and a soft, even halo spills onto the wall all the way around the glass, so the mirror seems to float in its own glow. A small touch sensor on the glass switches it on and shifts the light between warm white and cool white.
Frameless, With A Softer Arch
At 180 x 80cm the Clair gives a full head to toe reflection, and with no frame at all the glass runs right to the edge. The arch is a gentle one, wider and lower than a full half circle, which keeps the shape calm rather than showy. The corners at the bottom are square, so it sits flat and neat against a wall. It reads lighter than a framed mirror of the same size, which suits bedrooms, hallways and dressing rooms where you want the light without the visual weight.
Hang It Or Lean It
Two hanging plates and a recessed hanger slot on the rear take care of wall mounting, and the halo shows at its best on a flat wall with a little space around it. Leaned against the wall instead, the glow still washes the wall behind. Plan a power point close by: the lead from the mirror to its plug pack is short, about 15cm. The Clair is made for bedrooms, hallways and living spaces. It is not rated for use in a bathroom.
The Specs
Overall size 180 x 80cm and 30mm deep including the backlight. The glass is 3.3mm mirror glass, with the LED strip set around the rear edge. The light is a 15W LED, switchable between warm white and cool white from the sensor on the glass, powered by a plug pack with New Zealand approval. It weighs 16kg; two people make hanging it simpler.
| Height | 180cm |
| Width | 80cm |
| Depth | 30mm |
| Weight | 16kg |
| Packaging | 186.5 x 85 x 6.8cm, 20kg |
| Shipping Volume | 0.108 m³ |
| Shipping Weight | 20.0 kg |
| Frame Material | Frameless |
| Glass | 3.3mm Mirror Glass |
| Material | 3.3mm Mirror Glass, LED backlight strip, Backing board with hanging plates |
| Mounting | Hangs on the wall or leans on the floor |
| Care | Clean with a soft, lint free cloth and gentle glass cleaner. Avoid abrasive materials to prevent scratching. Switch off and unplug before cleaning. |
| Notes | Backlit LED halo, 15W, switchable warm white or cool white from the touch sensor on the glass. Plug pack with New Zealand approval, lead about 15cm. Not rated for bathrooms. Two hanging plates and a recessed hanger slot on the rear for wall mounting; suits leaning too. |
Styling
Room Setup
Interior
DimensionsA Halo Of Light Around The Glass
The Clair is a frameless arched mirror with a ring of LED light hidden behind its edge. Switch it on and a soft, even halo spills onto the wall all the way around the glass, so the mirror seems to float in its own glow. A small touch sensor on the glass switches it on and shifts the light between warm white and cool white.
Frameless, With A Softer Arch
At 180 x 80cm the Clair gives a full head to toe reflection, and with no frame at all the glass runs right to the edge. The arch is a gentle one, wider and lower than a full half circle, which keeps the shape calm rather than showy. The corners at the bottom are square, so it sits flat and neat against a wall. It reads lighter than a framed mirror of the same size, which suits bedrooms, hallways and dressing rooms where you want the light without the visual weight.
Hang It Or Lean It
Two hanging plates and a recessed hanger slot on the rear take care of wall mounting, and the halo shows at its best on a flat wall with a little space around it. Leaned against the wall instead, the glow still washes the wall behind. Plan a power point close by: the lead from the mirror to its plug pack is short, about 15cm. The Clair is made for bedrooms, hallways and living spaces. It is not rated for use in a bathroom.
The Specs
Overall size 180 x 80cm and 30mm deep including the backlight. The glass is 3.3mm mirror glass, with the LED strip set around the rear edge. The light is a 15W LED, switchable between warm white and cool white from the sensor on the glass, powered by a plug pack with New Zealand approval. It weighs 16kg; two people make hanging it simpler.
| Height | 180cm |
| Width | 80cm |
| Depth | 30mm |
| Weight | 16kg |
| Packaging | 186.5 x 85 x 6.8cm, 20kg |
| Shipping Volume | 0.108 m³ |
| Shipping Weight | 20.0 kg |
| Frame Material | Frameless |
| Glass | 3.3mm Mirror Glass |
| Material | 3.3mm Mirror Glass, LED backlight strip, Backing board with hanging plates |
| Mounting | Hangs on the wall or leans on the floor |
| Care | Clean with a soft, lint free cloth and gentle glass cleaner. Avoid abrasive materials to prevent scratching. Switch off and unplug before cleaning. |
Styling
Room Setup
Interior
DimensionsBundle 3+ items and save up to 10%. Curated to complement the Clair Arched Backlit LED Full-Length Mirror | 180 x 80cm.
Clair Arched Back...
Enter your postcode below
Enter your postcode below